Inventory

Furring Screws

Furring Screws

Flannery's Furring Screws allow for consistent spacing between welded or woven wire and building paper.  Furring nails have been available for years, but could only be utilized with wood framing.  Now, Flannery's Furring Screws can be used for both steel and wood framing.  Our Furring Screws were designed to ensure proper embedment of wire into the stucco. When installing Flannery's Furring Screws, the wire strand must be placed in the wad slot to protect against wad rotation caused by the screw gun.  Flannery's Furring Screws can be purchased in different sizes (1 1/4", 1 5/8" and 1 7/8") with the wads attached.  The Furring Wads themselves are also available for purchase separately.

 

Click here for the Material Safety Data Sheet (MSDS Report).

 

Patent # 6,365,679 B1

 

Installation Details

 

 

 

 

 

 

 

 

 

 

This website presents general guidelines and suggestions for the installation of Flannery trims and products. The purpose of these general guidelines and suggestions is to aid in a successful drywall or stucco finish based on the Uniform Building Code and industry standards. No website or catalog can address all of the unique specifics or installation details that occur from one project to another. Flannery recommends that every installer be familiar, or become acquainted with, common drywall and stucco trim installation practices before installing any of Flannery's many trims and products. Flannery also recommends that the specifying architect, engineer, and general contractor be consulted with as well. This website replaces and renders obsolete all previous publications by Flannery; including catalogs, pamphlets, or other forms of literature.